Installing A Sata/Sas/Ssd Hard Disk - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Press the release button on the hard disk enclosure. See step (1) in
The ejector lever automatically ejects.
Figure 5-109 Removing a hard disk
Step 3 Hold the ejector lever on the hard disk enclosure, and pull out the hard disk for
about 3 cm (1.18 in.). Wait at least 30s until the hard disk stops spinning, and
then remove it from the RH8100 V3. See step (2) in
Step 4 Place the removed hard disk in an ESD bag.
----End

5.8.4 Installing a SATA/SAS/SSD Hard Disk

This topic describes how to install a hard disk.
Scenarios
Install a hard disk if:
●
●
●
●
Issue 30 (2019-12-19)
You have determined the position on the RH8100 V3 for removing a hard
disk.
ESD gloves
Packaging materials, for example, an ESD bag
A hard disk has failed.
A hard disk needs to be replaced with a new model.
A hard disk has no free space.
A hard disk needs to be added.
Do not power off the RH8100 V3 when installing a hard disk.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure
1 Safety Instructions.
Figure 5-109.
5-109.
229