Table of Contents
Advertisement
RH8100 V3 Server
User Guide
Step 5 Configure IP address information for the iBMC management network port.
To set a configuration item, press ↑ or ↓ to select the configuration item, and then
press Enter. You can set the mode, address type, and IPv4 and IPv6 addresses of
the iBMC management network port.
Step 6 Press F10 to save the settings and exit.
----End
Querying and Setting the IP Address on the LCD
Step 1 Query the IP address.
1.
Figure 9-4 Setting
Step 2 Set the IP address.
1.
2.
Issue 30 (2019-12-19)
On the liquid crystal display (LCD), touch the Setting tab.
The Setting screen is displayed, as shown in
Click the Mgmt Port tab.
The Mgmt Port screen is displayed, as shown in
Set the IP address of the management network port based on the parameter
information described in
The soft keyboard is displayed after you click the text box. You can use the soft
keyboard to set the IP address or click Cancel to return to the Mgmt Port screen.
Table 9-2 Required data
Category
IP address
Information of
Copyright © Huawei Technologies Co., Ltd.
Table
9-2.
Parameter
Description
IPv4
9 Common Operations
Figure
9-4.
Figure
9-4.
Value Example
355
Advertisement
Table of Contents
