Table of Contents
Advertisement
RH8100 V3 Server
User Guide
●
Data
●
●
●
Tools
●
●
Hardware
Spare CPU
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare CPU out of its ESD bag.
Step 3 Ensure that the CPU socket does not have bent pins or foreign objects.
If a CPU socket has bent pins or foreign objects, stop installing the CPU and
contact Huawei technical support.
Step 4 Use a tissue to clean off any residual oil, thermal compound, or foreign objects
from the CPU or heat sink before installation.
Step 5 Determine the area on the heat sink for contacting the CPU, and paste thermal
compound in the center of the area.
Use a syringe to measure the thermal compound for pasting to the CPU.
5-1
Table 5-1 Quantity of thermal compound
Chip Size
50 mm x 50 mm
(1.97 in. x 1.97
in.)
Issue 30 (2019-12-19)
You have removed the compute module from the RH8100 V3. For details, see
5.2.1 Removing a Compute
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a CPU.
ESD wrist strap
Finger cots
NO TICE
Paste a suitable amount of thermal compound evenly on the CPU surface.
lists the quantity of thermal compound used for different chip sizes.
Quantity of Thermal Compound
0.4 ml
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
1 Safety
Instructions.
Table
121
Advertisement
Table of Contents
