Huawei RH8100 V3 User Manual page 133

RH8100 V3 Server
User Guide
Figure 5-10 Smeared thermal compound layer
Step 7
● To prevent damage to the CPU, CPU socket, or mainboard, ensure that the
● When you close the securing rod, do not exert excessive force or touch any
● Do not move the CPU if it is not correctly placed to avoid any twisted pins. Lift
Hold the CPU horizontally, align the triangle on the CPU with the triangle on the
CPU socket, and place the CPU vertically downward into the CPU socket by
avoiding touching the securing rods. See step (1) in
Ensure that the CPU is properly installed.
CPU.
Issue 30 (2019-12-19)
NO TICE
securing rod on the CPU socket is fully open before you install the CPU in the
socket.
components and gild pins on the CPU.
the CPU until it is out of the socket, and then place it in the socket properly.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure
Figure 5-12 shows an incorrectly placed
5-11.
123