Hard Disk Backplane Connectors - Huawei TaiShan X6000 User Manual

TaiShan X6000 Server
User Guide
No.
10

2.5 Hard Disk Backplane Connectors

Figure 2-6
Figure 2-6 Disk backplane
1
3
5
Issue 04 (2020-06-05)
Silkscree Name
n
- Power operating
status indicator
shows the connectors on the disk backplane.
Backplane signal cable
connector (J30)
Slimline connector (J13)
Slimline connector (J39)
Copyright © Huawei Technologies Co., Ltd.
Description
● Off: No AC power is supplied.
● Steady green: The power input
and output are normal.
● Steady orange: The input is
normal, but no power output is
supplied due to overheat
protection, overcurrent protection,
short circuit protection, output
overvoltage protection, or some
component failures.
● Blinking green at 1 Hz:
– The input is normal, the server
node is standby, and the PSU
is in MV6 mode. (The output
voltage is 6.7 V.)
– The input is overvoltage or
undervoltage.
– The PSU is in deep hibernation
mode.
● Blinking green at 4 Hz: under
online firmware upgrade.
2 Slimline connector (J17)
4 Slimline connector (J6)
6 Backplane signal cable
connector (J31)
2 Components
13