Removing And Installing Parts Of The Rh8100 V3 - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
5
Removing and Installing Parts of the
About This Chapter
This topic describes the replaceable parts of the RH8100 V3 and how to replace
them.
● Ensure that the obtained spare parts are compatible and function properly
● After parts replacement, the software, firmware, and CPLDs on the new
5.1 Replaceable Parts
5.2 Replacing a Compute Module and Its Internal Components
5.3 Replacing a DVD Drive+LCD Module and Its Internal Components
5.4 Replacing the Indicator Board and Its Interface Board
5.5 Replacing the FM-A and Its Internal Components
5.6 Replacing the FM-B and Its Internal Components
5.7 Replacing the FM-C and Its Internal Components
5.8 Replacing the FM-D and Its Internal Components
5.9 Replacing a Fan Module and PSU
5.10 Replacing an HFC and Its Internal Components
5.11 Replacing the Rear I/O Module and Its Internal Components
Issue 30 (2019-12-19)
NO TICE
before any replacement.
components must be upgraded to the version used in the customer
environment or to the latest version. It is recommended that the version be
upgraded to the version used in the customer environment. For details, see the
Huawei Rack Server Upgrade Guide (iBMC)
Upgrade Guide
.
Copyright © Huawei Technologies Co., Ltd.

5 Removing and Installing Parts of the RH8100 V3

Huawei Server Firmware
and
RH8100 V3
107