Replacing The Fm-C And Its Internal Components; Removing The Front I/O Module - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-92 Pushing a hard disk enclosure
Step 9 Lower the ejector lever of the hard disk enclosure. See step (2) in
Step 10 Connect all cables to the hard disk backplane.
----End

5.7 Replacing the FM-C and Its Internal Components

This topic describes how to replace the front I/O module of model C (FM-C) and
its internal components.

5.7.1 Removing the Front I/O Module

This topic describes how to remove the front I/O module.
Scenarios
Remove the front I/O module if:
●
●
●
●
Prerequisites
Conditions
Issue 30 (2019-12-19)
The front I/O module has failed.
A RAID controller card on the front I/O module has failed.
A supercapacitor on the front I/O module has failed.
A hard disk backplane has failed.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure 5-92.
208