RH8100 V3 Server
User Guide
Step 5 Connect the cable to the RAID controller card. See step (3) in
Step 6 Install the cover of the front I/O module in the arrow direction. See steps (1) and
(2) in
Figure 5-74 Installing a cover for the front I/O module
----End
5.6.7 Removing a Supercapacitor
This topic describes how to remove a supercapacitor.
Scenarios
When the LSISAS3108 storage control card is configured, a supercapacitor can be
configured for backup power supply. Remove a supercapacitor if:
●
●
Prerequisites
Conditions
●
●
Data
Issue 30 (2019-12-19)
Figure
5-74.
The supercapacitor has failed.
The supercapacitor is low.
You have powered off the RH8100 V3. For details, see
RH8100
V3. Then you have removed all power cables from the server.
You have removed the front I/O module. For details, see
Front I/O
Module.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure
5-73.
6.2 Powering Off the
5.6.1 Removing the
192