Huawei RH8100 V3 User Manual page 322

RH8100 V3 Server
User Guide
4.
Issue 30 (2019-12-19)
Figure 7-3 Network connection
Open a browser on the PC, enter the IP address of the iBMC management
network port in the address box, and press Enter. Then enter the user name
and password to log in, as shown in
For details about the default data of the iBMC management network port,
see 7.1 Configuration
network port is planned as follows:
– In single-system mode, the RH8100 V3 has only one iBMC management
network port IP address. To log in to the iBMC WebUI, enter the IP
address.
– In dual-system mode, both system A and system B of the RH8100 V3
have an iBMC management network port IP address. To log in to the
iBMC WebUI of system A, enter the IP address of system A. To log in to
the iBMC WebUI of system B, enter the IP address of system B.
If the system displays the message "The maximum number of sessions has been
reached." when you attempt to log in to the iBMC WebUI for the first time using
Internet Explorer, press Ctrl+Shift+DEL, and click Delete in the displayed dialog box to
clear the browser cache. Then attempt to log in again.
Copyright © Huawei Technologies Co., Ltd.
Figure
Overview. The IP address of the iBMC management
7 Configuring the RH8100 V3
9-6.
312