Querying And Changing The Network Port Names Of The Internal Nic - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 9-6 iBMC home page
The IP addresses 10.0.0.0 to 10.0.0.3 are reserved for internal use of iBMC. An
attempt to set the four IP addresses for ports by using the iBMC WebUI or CLI will
fail.
----End
9.3 Querying and Changing the Network Port Names
of the Internal NIC
This topic describes how to change the network port names of the internal NIC to
larger values (for example, eth87) to make the names differ from the network
port names of any external NIC.
Ensure to meet the following conditions:
●
●
●
●
Issue 30 (2019-12-19)
NO TICE
The RH8100 V3 is in dual-system mode.
The network ports on the internal NIC BCM5720 have been enabled in the
BIOS. For details, see "Miscellaneous Configuration" in the
Brickland Platform BIOS Parameter Reference
The RH8100 V3 is powered on.
You have logged in to the command-line interface (CLI) of the RH8100 V3
operating system (OS). This topic uses Linux as an example.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
Huawei Server
.
363