Huawei RH8100 V3 User Manual page 188

RH8100 V3 Server
User Guide
●
Data
●
●
●
Tools
●
●
●
Hardware
Spare hard disk backplane
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare hard disk backplane out of its ESD bag.
Step 3 Install the hard disk backplane into the I/O module in the arrow direction after
aligning the connectors on them. See step (1) in
Step 4 Lower the ejector levers on both sides of the backplane until the captive screws fit
into the holes and the backplane fully connects to the front I/O module. See step
(2) in
Figure 5-62 Installing a hard disk backplane
Issue 30 (2019-12-19)
You have removed the front I/O module from the RH8100 V3. For details, see
5.7.1 Removing the Front I/O
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing the hard
disk backplane.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Figure 5-62.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
Figure
1 Safety Instructions.
5-62.
178