Installing A Non-Hot-Swappable Pcie Card - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
●
Data
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Press the latch on the cover of the rear I/O module in the arrow direction. See step
(1) in
Step 3 Open the cover of the rear I/O module. See step (2) in
Step 4 Lift the PCIe card slowly out of the slot. See step (3) in
Figure 5-161 Removing a non-hot-swappable PCIe card
Step 5 Place the removed PCIe card in an ESD bag.
----End

5.11.6 Installing a Non-Hot-Swappable PCIe Card

This topic describes how to install a non-hot-swappable PCIe card.
Issue 30 (2019-12-19)
You have removed the rear I/O module from the RH8100 V3. For details, see
5.11.1 Removing a Rear I/O
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing a PCIe
card.
ESD gloves
Packaging materials, for example, an ESD bag
Figure 5-161.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
1 Safety Instructions.
Figure 5-161.
Figure 5-161.
295