Table of Contents
Advertisement
RH8100 V3 Server
User Guide
Name
iBMC
manag
ement
networ
k port
Serial
port
Networ
k port
Issue 30 (2019-12-19)
Type
Qua
Single-
ntity
System
Mode
RJ45
1
Unavailab
le
RJ45
1
Unavailab
le
-
-
● Availa
ble for
an
RH810
0 V3
with
eight
CPUs
● Unavai
lable
for an
RH810
0 V3
with
four
CPUs
Copyright © Huawei Technologies Co., Ltd.
Dual-
Description
System
Mode
Unavailab
In dual-system mode, the
le
iBMC management network
port of HFC-1 is unavailable
and the network cable does
not need to be connected. But
the iBMC of HFC-1 still works
and can be accessed through
the iBMC management
network port of HFC-2.
Available
Three-pin serial port. The
default baud rate is 115200
bits/s.
In dual-system mode, this
serial port is used as the
system serial port by default.
You can set it as the iBMC
serial port on the iBMC CLI.
In single-system mode, this
serial port is unavailable.
Available
The type and quantity of
network ports vary according
to the configured LAN on
motherboard (LOM) type.
2 About the RH8100 V3
23
Advertisement
Table of Contents
