Configuring The Bios - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide

7.6 Configuring the BIOS

This topic describes how to configure the BIOS, including setting the server boot
priority and BIOS password, selecting BEV as a boot option, and enabling the
Preboot Execution Environment (PXE) function for a network interface card (NIC).
Scenarios
Configure the BIOS in remote control mode. For details, see the
Brickland Platform BIOS Parameter Reference
Prerequisites
Conditions
●
●
Data
None
Workflow
Figure 7-18
Issue 30 (2019-12-19)
Figure 7-17 LSISAS3108 (SR430C) controller card
If an active/standby switchover occurs in the BIOSs, the BIOS passwords and custom BIOS
settings (settings in the BIOS Setup) in the active and standby BIOS flashes are not
synchronized to each other. That is, after an active/standby switchover, the BIOS password
and custom BIOS settings in the previously standby flash are used.
The RH8100 V3 is powered on.
You have logged in to the iBMC WebUI. For details, see
iBMC WebUI.
shows the process for configuring the BIOS.
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the RH8100 V3
Huawei Server
.
9.2 Logging In to the
323