Huawei RH8100 V3 User Manual page 269

RH8100 V3 Server
User Guide
You have powered off the RH8100 V3. For details, see
RH8100
Data
●
●
●
Tools
●
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Loosen the screw on the PSU cover and remove the cover. See step (1) in
5-135.
Step 3 Loosen the screw on the positive and negative power cables, and remove the
cables. See step (2) in
Figure 5-135 Removing power cables
Step 4 Press the latch on the PSU, and pull out the PSU halfway while holding the
handle. See step (1) in
Step 5 Release the latch, and pull the PSU entirely out of the slot. See step (2) in
5-136.
Issue 30 (2019-12-19)
V3.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a DC PSU.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Figure
Figure
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
5-135.
5-136.
6.2 Powering Off the
1 Safety Instructions.
Figure
Figure
259