Removing A Hard Disk Indicator Panel - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-80 Installing a cover for the front I/O module
----End

5.6.9 Removing a Hard Disk Indicator Panel

This topic describes how to remove a hard disk indicator panel.
Scenarios
Remove a hard disk indicator panel when it is faulty and needs to be replaced.
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the front I/O module. For details, see
Front I/O Module.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the hard
disk indicator panel.
ESD gloves
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
6.2 Powering Off the
5.6.1 Removing the
197