Table of Contents
Advertisement
RH8100 V3 Server
User Guide
Figure 5-26 Installing a cover for a DVD drive+LCD module
----End
5.4 Replacing the Indicator Board and Its Interface
Board
This topic describes how to replace an indicator board and its interface board.
5.4.1 Removing the Indicator Board
This topic describes how to remove the indicator board.
Scenarios
Remove the indicator board if it has failed.
Prerequisites
Conditions
You have powered off the RH8100 V3. For details, see
RH8100
Data
●
●
●
Tools
●
●
●
Issue 30 (2019-12-19)
V3. Then you have removed all power cables from the server.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the
indicator board.
ESD gloves
Flat-head screwdriver
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
6.2 Powering Off the
140
Advertisement
Table of Contents
