Huawei RH8100 V3 User Manual page 155

RH8100 V3 Server
User Guide
Scenarios
Remove the indicator board interface module if it has failed.
Prerequisites
Conditions
●
●
●
Data
●
●
●
Tools
●
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Open the latch that secures the indicator board interface module. See step (1) in
Figure
Step 3 Gently pull out the indicator board interface module. See step (2) in
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the DVD drive+LCD module from the RH8100 V3. For
details, see 5.3.1 Removing a DVD Drive+LCD
You have removed the indicator board. For details, see
Indicator Board.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the
indicator board interface module.
ESD gloves
Packaging materials, for example, an ESD bag
M3 Phillips screwdriver
5-31.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
6.2 Powering Off the
5.4.1 Removing the
1 Safety Instructions.
Figure 5-31.
145