Installing An Indicator Board Interface Module - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-32 Removing an indicator board interface module
Step 6 Place the removed interface module in an ESD bag.
----End

5.4.4 Installing an Indicator Board Interface Module

This topic describes how to install an indicator board interface module.
Scenarios
Install an indicator board interface module if the original one has failed.
Prerequisites
Conditions
●
●
●
Data
●
●
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the DVD drive+LCD module from the RH8100 V3. For
details, see 5.3.1 Removing a DVD Drive+LCD
You have removed the indicator board. For details, see
Indicator Board.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
6.2 Powering Off the
5.4.1 Removing the
147