Huawei Tecal RH2485 V2 Operation Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Server
  5. Tecal RH2485 V2
  6. Operation manual
Huawei Tecal RH2485 V2 Operation Manual

Huawei Tecal RH2485 V2 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Acceptance Manual
Tecal RH2485 V2 Server
Part II Operation Guide ................................................................................................................ 1
T01 Hardware ..............................................................................................................................1
T01-01 Packaging ................................................................................................................1
T01-02 Chassis ....................................................................................................................1
T01-03 PSU ..........................................................................................................................2
T01-04 Hardware Detection .................................................................................................3
T01-05 Hard Disk Controller ................................................................................................4
T02 Device Management Software .............................................................................................5
T02-01 Alarm Detection .......................................................................................................5
T02-02 Basic BMC Functions ..............................................................................................5
T03 OS .........................................................................................................................................7
T03-01 OS Installation and Functions ..................................................................................7
T04 iMana Functions ...................................................................................................................8
T04-01 Verifying iMana Web Login ......................................................................................8
T04-02 Querying the Server Health Status ..........................................................................9
T04-03 Querying Server Logs ..............................................................................................9
T04-04 Verifying the Remote KVM Function .................................................................... 10
T04-05 Powering On/Off and Resetting a Server Remotely ............................................. 10
T04-06 Setting an IP Address ........................................................................................... 11
T04-07 Verifying the Location Indicator Function ............................................................. 11
T04-08 Setting the System Boot Option ........................................................................... 12
T05 Hard Disk Controller Functions .......................................................................................... 12
LSI2208 ............................................................................................................................. 16
Controller LSI2208 ............................................................................................................ 17
T05-08 Verifying the RAID State Migration Function for the Hard Disk Controller LSI230818
T05-09 Verifying the RAID State Migration Function for the Hard Disk Controller LSI220818
T06 Verifying the PXE Function on Network Ports ................................................................... 20
T06-01 Verifying the PXE Function on Network Ports ...................................................... 20

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading

Related Manuals for Huawei Tecal RH2485 V2

Summary of Contents for Huawei Tecal RH2485 V2

  • Page 1: Table Of Contents

    Acceptance Manual Table of Contents Tecal RH2485 V2 Server Table of Contents Part II Operation Guide ........................ 1 T01 Hardware ..........................1 T01-01 Packaging ........................1 T01-02 Chassis ........................1 T01-03 PSU ..........................2 T01-04 Hardware Detection ....................3 T01-05 Hard Disk Controller ....................4 T02 Device Management Software .....................5 T02-01 Alarm Detection .......................5...

  • Page 2: Part Ii Operation Guide

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Part II Operation Guide T01 Hardware T01-01 Packaging T01-0101 Packaging Objective To verify the server packaging Test Networking None Diagram Preset Conditions Test Procedures Check whether the packaging is intact and not soaking.

  • Page 3: T01-03 Psu

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Test Description None T01-03 PSU T01-0301 Verifying the PSU Installation and Power-on State Objective To verify the installation and power-on status of the power supply units (PSUs) Test Networking None...

  • Page 4: T01-04 Hardware Detection

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server T01-0303 Verifying the Backup Function Objective To verify whether the PSUs are configured in redundancy mode. Test Networking None Diagram Preset Conditions The structure of the mainboard, hard disk backplane, I/O board, indicator board, VGA board, and power board is proper.

  • Page 5: T01-05 Hard Disk Controller

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server The BIOS version is displayed. No abnormal noise is heard during the startup. Test Description None T01-05 Hard Disk Controller T01-0501 Verifying the LSI2308 Hard Disk Controller Objective To verify that the hard disk controller operates properly.

  • Page 6: T02 Device Management Software

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Expected Result The window for configuring the hard disk controller is displayed. The firmware versions, firmware package version, and WebBIOS version are displayed. The hard disk quantity, installation positions, and capacity are the same as actual configurations.
  • Page 7 Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server The Internet Explorer 8.0, Firefox 9.0, or later is available. Test Procedures Power on the server system and wait about 10s. Connect the terminal to the iMana management network port (connect to the Mgnt port on the left of the VGA port), enter http://192.168.2.100, and press...

  • Page 8: T03 Os

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server The status of all fans is shown as The hard disk and DIMM installation status are the same as actual site information. The network delay is shorter than 3s. Test Description...

  • Page 9: T04 Imana Functions

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Preset Conditions The structure of the mainboard and hard disk backplane is proper, and hard disks are detected after the server is powered on. Test Procedures Install a Windows OS.

  • Page 10: T04-02 Querying The Server Health Status

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server T04-02 Querying the Server Health Status Objective To verify that you can query the server health status on the iMana Web. Test Networking None Diagram Preset Conditions AC power is supplied to the server.

  • Page 11: T04-04 Verifying The Remote Kvm Function

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server T04-04 Verifying the Remote KVM Function Objective To verify the remote keyboard, video, and mouse (KVM) function by using the WebUI Test Networking None Diagram Preset Conditions AC power is supplied to the server.

  • Page 12: T04-06 Setting An Ip Address

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server successfully. Test Description T04-06 Setting an IP Address Objective To verify that you can set an IP address on the iMana Web. Test Networking None Diagram Preset Conditions AC power is supplied to the server.

  • Page 13: T04-08 Setting The System Boot Option

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Select Steady On and click OK. Choose Temporary On, enter a time period for illumination, such as 10 seconds, and click OK. Select Off and click OK. Observe the status of the location indicator on the server.

  • Page 14: T05-02 Configuring Raid 1 Properties By Using The Hard Disk Controller Lsi2208

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Objective To verify the function of configuring RAID 1 on the hard disk controller LSI SAS2308. Test Networking None Diagram Preset Conditions The server is powered on, and the hard disks are detected.

  • Page 15: T05-03 Configuring Raid 5 Properties By Using The Hard Disk Controller Lsi2208

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Click Next and Accept in the two displayed windows respectively. Click Yes when "Save this configuration?" is displayed. Select Yes when "All data on the new Virtual Drives will be lost, want to initialize?"...

  • Page 16: T05-04 Configuring Raid 10 Properties By Using The Hard Disk Controller Lsi2208

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Test Description T05-04 Configuring RAID 10 Properties by Using the Hard Disk Controller LSI SAS2208 T05-0401 Configuring RAID 10 Properties by Using the Hard Disk Controller LSI SAS2208 Objective To verify that you can configure RAID 10 properties by using the hard disk controller...

  • Page 17: T05-05 Configuring Raid 0 Properties By Using The Hard Disk Controller Lsi2208

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server T05-05 Configuring RAID 0 Properties by Using the Hard Disk Controller LSI SAS2208 T05-0501 Configuring RAID 0 Properties by Using the Hard Disk Controller LSI SAS2208 Objective To verify that you can configure RAID 0 properties by using the hard disk controller...

  • Page 18: T05-07 Setting And Verifying A Dedicated Hot Spare Disk By Using The Hard Disk Controller Lsi2208

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Diagram Preset Conditions The server is powered on, and the hard disks are detected. Test Procedures Press Ctrl+H in the POST phase. The window for configuring the LSI SAS2208 is displayed.
  • Page 19 Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server T05-08 Verifying the RAID State Migration Function for the Hard Disk Controller LSI SAS2308 T05-0801 Verifying the RAID State Migration Function for the Hard Disk Controller LSI SAS2308 Objective To verify the RAID state migration function for the LSI SAS2308...

  • Page 20: T05-10 Verifying The Hot Swap Function For The Hard Disk Controller Lsi2308

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Power off the server, and remove the power cables. Remove all the RAID 5 member disks in step 2 from the server, and install them on another server that has the same configurations as the previous one. For details about how to verify RAID properties, see case T01-0502.

  • Page 21: T06 Verifying The Pxe Function On Network Ports

    Acceptance Manual Part II Operation Guide Tecal RH2485 V2 Server Objective To verify the hot swap function for the LSI SAS2208 Test Networking None Diagram Preset Conditions The server is powered on. You have configured RAID 1 properties by using two hard disks, synchronized data between hard disks, and installed an OS.

Table of Contents