Huawei RH8100 V3 User Manual page 265

RH8100 V3 Server
User Guide
indicators to determine PSU status. For details about the indicators, see
Indicators and
Data
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 (Optional) If only two PSUs are configured, power off the RH8100 V3. For details,
see
Step 3 Open the power cable clip. See step (1) in
Step 4 Remove the power cable from the PSU to be replaced. See step (2) in
5-131.
Figure 5-131 Removing a power cable
Step 5 Press the latch on the PSU, and pull out part of the PSU while holding the handle.
See step (1) in
Issue 30 (2019-12-19)
Buttons.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing an AC PSU.
ESD gloves
Packaging materials, for example, an ESD bag
6.2 Powering Off the RH8100
Figure 5-132.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
V3.
Figure 5-131.
2.4
1 Safety Instructions.
Figure
255