Huawei RH8100 V3 User Manual page 160

RH8100 V3 Server
User Guide
Prerequisites
Conditions
You have powered off the RH8100 V3. For details, see
RH8100
Data
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Raise both ejector levers on the front I/O module. See step (1) in
Step 3 Pull the front I/O module out of the slot while holding the ejector levers. See step
(2) in
Figure 5-35 Removing a front I/O module
Issue 30 (2019-12-19)
V3. Then you have removed all power cables from the server.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the front
I/O module.
ESD gloves
Packaging materials, for example, an ESD bag
Figure 5-35.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
6.2 Powering Off the
1 Safety Instructions.
Figure 5-35.
150