Huawei RH8100 V3 User Manual page 306

RH8100 V3 Server
User Guide
Scenarios
Install a non-hot-swappable PCIe card if the original one has failed.
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
●
Hardware
Spare PCIe card
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare PCIe card out of its ESD bag.
Step 3 Insert the PCIe card into a PCIe slot. See step (1) in
Step 4 Close the cover of the rear I/O module. See step (2) in
Figure 5-162 Installing a non-hot-swappable PCIe card
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the rear I/O module from the RH8100 V3. For details, see
5.11.1 Removing a Rear I/O
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a PCIe card.
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
Figure
6.2 Powering Off the
1 Safety Instructions.
5-162.
Figure 5-162.
296