Installing A Hard Disk - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Prerequisites
Conditions
You have backed up the data on the hard disk to be removed and deleted RAID
configuration from the hard disk if services are running on the RH8100 V3.
Data
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Press the release button on the hard disk enclosure. See step (1) in
The ejector lever automatically ejects.
Figure 5-37 Removing a hard disk
Step 3 Hold the ejector lever on the hard disk enclosure, and pull out the hard disk for
about 3 cm (1.18 in.). Wait at least 30s until the hard disk stops spinning, and
then remove it from the RH8100 V3. See step (2) in
Step 4 Place the removed hard disk in an ESD bag.
----End

5.5.4 Installing a Hard Disk

This topic describes how to install a hard disk.
Issue 30 (2019-12-19)
Do not power off the RH8100 V3 when removing a hard disk.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing a hard
disk.
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure
1 Safety Instructions.
Figure 5-37.
5-37.
154