Installing A Front I/O Module - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-63 Removing a front I/O module
Step 4 Remove the RAID controller card, supercapacitor, hard disk indicator panel, and
hard disk backplane from the front I/O module. Place the front I/O module in an
ESD bag.
For details, see
Supercapacitor,
Removing a Hard Disk
----End

5.6.2 Installing a Front I/O Module

This topic describes how to install a front I/O module.
Scenarios
Install a front I/O module if:
●
●
●
●
●
Prerequisites
Conditions
Issue 30 (2019-12-19)
5.6.5 Removing a RAID Controller
5.6.9 Removing a Hard Disk Indicator
Backplane.
The front I/O module has failed.
A RAID controller card on the front I/O module has failed.
A supercapacitor on the front I/O module has failed.
A hard disk indicator panel has failed.
A hard disk backplane has failed.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Card, 5.6.7 Removing a
Panel, and 5.6.11
180