Huawei RH8100 V3 User Manual page 126

RH8100 V3 Server
User Guide
You have installed all DIMMs on the memory board to be installed. For details, see
5.2.8 Installing a
Data
●
●
●
Tools
●
●
Hardware
Spare memory board
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare memory board out of the ESD bag, and install all DIMMs of the
required model on the memory board.
Step 3 Insert the memory board slowly into the slot on the compute module while
holding the ejector lever on the memory board. See step (1) in
Step 4 Lower the ejector lever on the memory board. See step (2) in
Issue 30 (2019-12-19)
DIMM.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a memory
board.
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
1 Safety Instructions.
Figure 5-5.
Figure 5-5.
116