Table of Contents
Advertisement
RH8100 V3 Server
User Guide
●
●
Tools
●
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Press the two buttons on the front I/O module cover. See step (1) in
Step 3 Take out the cover of the front I/O module in the arrow direction. See step (2) in
Figure
Figure 5-85 Removing a cover from a front I/O module
Step 4 Remove all cables connecting to the hard disk backplane.
Step 5 Press the release button that secures the ejector lever. See step (1) in
The ejector lever automatically ejects.
Issue 30 (2019-12-19)
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the hard
disk backplane.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
5-85.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
1 Safety
Instructions.
Figure
Figure
5-85.
5-86.
202
Advertisement
Table of Contents
