Huawei RH8100 V3 User Manual page 277

RH8100 V3 Server
User Guide
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Loosen the screw on the TPM using a Phillips screwdriver. See step (1) in
5-141.
Figure 5-141 Removing a TPM
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the High-performance Fusion Console (HFC) from the
RH8100 V3. For details, see
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing a TPM.
ESD gloves
M3 Phillips screwdriver
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
5.10.1 Removing an
6.2 Powering Off the
HFC.
1 Safety Instructions.
Figure
267