Huawei RH8100 V3 User Manual page 92

RH8100 V3 Server
User Guide
The following tools are available:
●
●
●
●
Procedure
Step 1 Check whether the package is in good condition.
Step 2
To avoid personal injury or equipment damage, be careful when using a box
cutter.
Use a box cutter to cut the pressure-sensitive adhesive tape on the package, and
open the package.
Step 3 Based on
condition, without defects such as oxidation, chemical corrosion, missing
components, or other damage incurred during transport.
Issue 30 (2019-12-19)
Protective gloves
ESD gloves
ESD wrist strap
Box cutter
If the package is damaged (for example, the package is soaked or deformed, or the seals or
pressure-sensitive adhesive tape is unsealed), fill in the
Figure 3-1 and
Copyright © Huawei Technologies Co., Ltd.
Table 3-2, check that the components are in good
3 Installing the RH8100 V3
Cargo Problem Feedback Form .
82