Huawei RH8100 V3 User Manual page 97

RH8100 V3 Server
User Guide
Step 4 If the RH8100 V3 is equipped with compute modules, remove the compute
modules before installing the RH8100 V3.
1.
2.
3.
4.
Step 5 Install the RH8100 V3.
1.
2.
Issue 30 (2019-12-19)
Ensure that the system where the compute module to be removed is located
is powered off (the power indicator of the system is off). Press the ejector
release buttons to eject the ejector levers. See step (1) in
Raise both ejector levers on the compute module. See step (2) in
Hold the ejector levers and pull the compute module out of the slot. See step
(3) in Figure 3-6.
Figure 3-6 Removing a compute module
Place the removed compute module onto an ESD platform.
Lift the RH8100 V3 on both sides and move it to the cabinet (at least four
persons are required to perform this operation).
Place the RH8100 V3 onto the guide rails and push it into the cabinet. See
step (1) in Figure 3-7.
Copyright © Huawei Technologies Co., Ltd.
3 Installing the RH8100 V3
Figure 3-6.
Figure 3-6.
87