Logging In To The Remote Desktop - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 7-8 Modifying user information
Step 3 Change the user password as prompted, and click Save.
----End

7.4 Logging In to the Remote Desktop

This topic describes how to log in to the remote desktop of the server using the
iBMC WebUI.
Scenarios
Log in to the iBMC WebUI, open the remote control page, and log in to the server
in remote control mode to manage and monitor it.
Prerequisites
Conditions
No special conditions are required for this operation.
Data
The following data is available:
●
●
Procedure
Step 1 Log in to the iBMC WebUI.
For details, see
Step 2 On the menu bar, choose Remote.
The Remote page is displayed, as shown in
Issue 30 (2019-12-19)
IP address of the iBMC management network port
iBMC user name and password
The default user name is root, and the default password is Huawei12#$.
9.2 Logging In to the iBMC
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the RH8100 V3
WebUI.
Figure 7-9.
316