Huawei RH8100 V3 User Manual page 172

RH8100 V3 Server
User Guide
Use the
about the precautions and accessories for installing the GPU card.
A dedicated PCIe riser card is required for installing a GPU card. If the PCIe riser
card to be installed is not dedicated for GPU cards, contact Huawei to deliver a
dedicated card.
Scenarios
Install a PCIe card if the original one has failed.
Prerequisites
Conditions
●
●
●
Data
●
●
●
Tools
●
●
Hardware
Spare PCIe card
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare PCIe card out of its ESD bag.
Step 3 Insert the PCIe card into a PCIe slot. See step (1) in
Step 4 Close the PCIe card latches. See step (2) in
Step 5 Close the baffle outside the PCIe card. See step (3) in
Issue 30 (2019-12-19)
Intelligent Computing Compatibility Checker
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the front I/O module from the RH8100 V3. For details, see
5.5.1 Removing the Front I/O
You have removed the riser card from the RH8100 V3. For details, see
Removing a Riser Card.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a PCIe card.
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
Figure
Figure 5-45.
Figure
to obtain information
6.2 Powering Off the
5.5.5
1 Safety Instructions.
5-45.
5-45.
162