Huawei RH8100 V3 User Manual page 293

RH8100 V3 Server
User Guide
Before you hot-swap a Qlogic card on Windows, uninstall the Qlogic card
management software, including:
Management Agents, QConvergeConsole CLI Management Tool, and
QConvergeConsole GUI Management Tool
Otherwise, after you press the hot swap button, the Qlogic card cannot be
powered off because the Qlogic card driver is used by the management software.
Data
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Press the hot swap button on the right of the PCIe card.
15, 16, and 17 in
indicator, and hot swap button on the PCIe card respectively.
Step 3 Wait until the power indicator is off.
Step 4 Squeeze the green latch on the PCIe card handle. See step (1) in
Step 5 Pull the PCIe card out of the slot while holding the handle. See step (2) in
5-151.
Issue 30 (2019-12-19)
NO TICE
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing a PCIe
card.
ESD gloves
Packaging materials, for example, an ESD bag
Figure 2-10
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
show the positions of the status indicator, power
1 Safety Instructions.
Figure 5-151.
Figure
283