Huawei RH8100 V3 User Manual page 115

RH8100 V3 Server
User Guide
Procedure
Step 1 Power off the RH8100 V3.
For details, see
Step 2 Disconnect all power cables and signal cables from the RH8100 V3.
Step 3 Remove all compute modules.
1.
2.
3.
4.
Step 4 Remove the protection covers of the captive screws on the RH8100 V3 panel. See
step (1) in
Issue 30 (2019-12-19)
6.2 Powering Off the RH8100
Ensure that the system where the compute module to be removed is located
is powered off (the power indicator of the system is off). Press the ejector
release buttons to eject the ejector levers. See step (1) in
Raise both ejector levers on the compute module. See step (2) in
Hold the ejector levers and pull the compute module out of the slot. See step
(3) in Figure 4-1.
Figure 4-1 Removing a compute module
Place the removed compute module onto an ESD platform.
Figure 4-2.
Copyright © Huawei Technologies Co., Ltd.
4 Removing the RH8100 V3
V3.
Figure 4-1.
Figure 4-1.
105