Huawei RH8100 V3 User Manual page 257

RH8100 V3 Server
User Guide
Tools
●
●
●
Hardware
Spare supercapacitor
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare supercapacitor out of its ESD bag.
Step 3 Connect the power cable to the supercapacitor. See step (1) in
Step 4 Place the supercapacitor in the tray, and push down the supercapacitor cover in
the arrow direction until the latches on the supercapacitor cover snap into the
tray. See step (2) in
Figure 5-125 Installing a supercapacitor
Step 5 Place the supercapacitor tray in the front I/O module. See step (1) in
5-126.
Step 6 Tighten the screws on the supercapacitor tray. See step (2) in
Issue 30 (2019-12-19)
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Figure
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
5-125.
1 Safety Instructions.
Figure 5-125.
Figure
Figure 5-126.
247