Table of Contents
Advertisement
RH8100 V3 Server
User Guide
Figure 7-26 Boot
Step 2 Select PXE1 Configuration or PXE2 Configuration and press Enter.
Step 3 Choose Enable from the shortcut menu and press Enter to enable the PXE
function for the specified network port.
----End
Select BEV as a Boot Option
Step 1 Select a boot option, and press + or - to change the order of the boot option.
Select BEV as a boot option.
The one at the top of the boot option list is the first boot option, and the one at
the bottom is the last boot option.
●
●
Step 2 Press F10.
The Save configuration and exit? dialog box appears.
Issue 30 (2019-12-19)
● In RH8100 V3 single-system mode, PXE1 Configuration and PXE2 Configuration are
respectively available for Port 1 and Port 2 in HFC-2, and PXE3 Configuration and PXE4
Configuration are respectively available for Port 1 and Port 2 in HFC-1. Other ports
cannot be configured with PXE.
● In RH8100 V3 dual-system mode, PXE1 Configuration and PXE2 Configuration in
system A are respectively available for Port 1 and Port 2 in HFC-2, and PXE3
Configuration and PXE4 Configuration in system B are respectively available for Port 1
and Port 2 in HFC-1. Other ports cannot be configured with PXE.
To move a boot option up, press +.
To move a boot option down, press -.
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the RH8100 V3
333
Advertisement
Table of Contents
