Huawei RH8100 V3 User Manual page 124

RH8100 V3 Server
User Guide
3.
Step 3 When both the memory board ATTN indicator and the memory board button/
status indicator are off, press the button on the memory board. See step (1) in
Figure
The ejector lever automatically ejects.
Issue 30 (2019-12-19)
Figure 5-3 Hot swap of a memory board
The system starts to migrate data, and the progress bar displays the
migration progress. When the migration progress reaches 100%, the
migration is complete and the faulty memory board powers off.
Press the button on the faulty memory board to migrate data to a spare
memory board.
– If data migration is in progress, the memory board status indicator is
steady on and the ATTN indicator on the memory board is blinking.
– If you press the memory board button again within 5 seconds, the data
migration is canceled. In this situation, the memory board status indicator
is steady on and the ATTN indicator is off.
– If you do not press the memory board button again within 5 seconds, the
data migration starts. In this situation, the memory board status indicator
is blinking and the ATTN indicator is off.
– When the data migration is complete, the faulty memory board powers
off. In this situation, the memory board status indicator and the ATTN
indicator are both off. The memory board is removable.
– If the data migration fails, the faulty memory board does not power off.
In this situation, the memory board status indicator and the ATTN
indicator are both steady on. The memory board is not removable.
5-4.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
114