Huawei RH8100 V3 User Manual page 374

RH8100 V3 Server
User Guide
Querying the Network Port Names of the Internal NIC
Query the network port names of the internal NIC BCM5720.
1.
2.
3.
Issue 30 (2019-12-19)
Run the lspci | grep broadcom command to query the value of bus-info for
each network port on this NIC.
In the command output, 07:00.0 and 07:00.1 in the red rectangles are the
values of bus-info for two network ports on the NIC.
Run the ifconfig -a command to list all network ports.
In the command output, eth
Run the ethtool -i eth
network port. (In the command, eth
2.)
Compare the values of bus-info queried in step 1 with those queried in step 3.
If two values of bus-info are the same, the corresponding eth
port name of the internal NIC.
Copyright © Huawei Technologies Co., Ltd.
X indicates a network port name.
X command to query the value of bus-info for each
X is a network port name queried in step
9 Common Operations
X is a network
364