Huawei RH8100 V3 User Manual page 145

RH8100 V3 Server
User Guide
Prerequisites
Conditions
You have removed the DVD drive+LCD module from the RH8100 V3. For details,
see
Data
●
●
●
Tools
●
●
Hardware
Spare LCD
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare LCD out of its ESD bag.
Step 3 Connect a cable to the DVD drive+LCD module. See step (1) in
Step 4 Place the LCD in the frame, and press the LCD in the arrow direction until you
hear a sound, which indicates that the LCD is secured. See step (2) in
Step 5 Install the LCD in the DVD drive+LCD module in the arrow direction. See step (3)
in
Issue 30 (2019-12-19)
5.3.1 Removing a DVD Drive+LCD
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing an LCD.
ESD gloves
Packaging materials, for example, an ESD bag
Figure 5-22.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
1 Safety Instructions.
Figure 5-22.
Figure 5-22.
135