Table of Contents
Advertisement
RH8100 V3 Server
User Guide
3.
4.
5.
6.
Issue 30 (2019-12-19)
Connect chassis power cables to external power supplies for automatic power-
on.
Connect the chassis power cables to external power supplies. If the server
does not power on automatically, see
When the server is powered on, iBMC is also powered on automatically.
Log in to iBMC.
For details, see
9.2 Logging In to the iBMC
(For the FM-A only) Set the RAID mode.
On the menu bar, choose Config.
In the left panel, choose System.
The System page is displayed, as shown in
hard partitioning parameters.
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the RH8100 V3
6.1 Powering On the RH8100
WebUI.
Figure
7-34.
Table 7-8
V3.
describes
342
Advertisement
Table of Contents
