Electra Elite IPK II
___________________________________________________________________________________
3.6
___________________________________________________________________________________
System Hardware Manual
3.5.2
Connecting the Cables on the CTA-U Unit
Connect the RS-232C cable from the computer to the connector on
the CTA-U Unit as shown in
Cable to the CTA-U Unit on the Multiline
Figure 11-28 Connecting the RS-232C Cable to the CTA-U Unit on
3.5.3
Installing the Driver on the PC
Using the setup disk provided with the CTA-U Unit install the driver
on your PC. Refer to the CTA installation Guide for instructions on
installing CTA setup disks .
Computer Telephony Adapter, CTU(8)-U Unit, with USB Interface
The CTU adapter connects to a PC USB port to provide telephony and sound
device control. The general functions of the CTU include:
Telephony Control
The application is based on the Microsoft Telephony Application
Programming Interface (TAPI) and provides call handling on the PC
( e.g ., call, answer, Hold, Transfer, Conference, or Caller ID).
User Interface to support D
This function provides the functions of D
indications, LCD, Line keys, or Hookswitch.
Sound Support
Allows voice recording or recording playing on an audio device assigned
to the PC. Voice Mail and Live Record are supported on the PC.
Supports Plug and Play
Figure 11-28 Connecting the RS-232C
the Multiline Terminal
term
Emulation
term
Document Revision 3
Terminal.
such as normal telephone
11 - 23