NEC Electra Elite IPK II System Hardware Manual page 589

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
Figure 13-15 Attaching the Wall Mount Stand to the Base Unit
2. Plug the AC adapter in the base unit.
3. Place the AC adapter cord inside the molded channel of the
wall mount stand.
Figure 13-16 Placing the AC Adapter Cord In the Wall Mount Stand
4. Plug one end of the short telephone cord (locally supplied) in
the LINE IN jack on the base unit. Plug one end of the NEC
digital multiline telephone in the LINE OUT jack. Place the
telephone cords inside the molded channels on the bottom of
the wall mount stand.
Document Revision 3
13 - 21