Switch Settings; Led Indications; Connectors - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
6. To shut down the voice mail, press the SHUTDOWN Switch
S3, and wait for the Shutdown LED to light green.
It may take several minutes for the voice mail to shutdown.
7. Turn OFF the KSU power, and remove the ETU from the KSU.
8. Make sure to transport the ETU in the original packaging.
7.3.8

Switch Settings

For switch setting information, refer to documentation for the Specific
application.
7.3.9

LED Indications

For LED indication information, refer to documentation for the
Specific application.
7.3.10

Connectors

The CTP( )-U10 ETU has the following connectors:
USB
Connectors for USB mouse and Keyboard
DIMM1
Slot for SO-DIMM memory
Compact Flash
Flash drive slot
Hard Drive
Connection for drive media
LAN
RJ-45 LAN connector for network connection
DSP Module 1
Port expansion connector for first DSP8-U10; this slot should
be used for 4-and 8-port configurations.
DSP Module 2
Port expansion connector for second DSP8-U10; this slot
should be used when adding a second DSP8-U10 for 12-and
16-port configurations.
VGA
Connector for VGA type video monitor
Document Revision 3
6 - 111