Download Print this page

Advertisement

NOTICE
Note that when converting this document from its original format to a .pdf file,
some minor font and format changes may occur causing slight variations. When
viewing and printing this document, we cannot guarantee that your specific PC or
printer will support all of the fonts or graphics. Therefore, when you view the
document fonts may be substituted and your individual printer may not have the
capability to print the document correctly.

Advertisement

   Summary of Contents for NEC Electra Elite IPK

  • Page 1

    NOTICE Note that when converting this document from its original format to a .pdf file, some minor font and format changes may occur causing slight variations. When viewing and printing this document, we cannot guarantee that your specific PC or printer will support all of the fonts or graphics.

  • Page 2

    System Administration Terminal (SAT) End-User Manual CD Stock Number 750837 Document Revision 2a (Applies to Release 1000 through Release 2500)

  • Page 4

    Contents of this manual are subject to change without prior notice at the discretion of NEC Unified Solutions, Inc. This document has been prepared for the use of employees and customers of NEC Unified Solutions, Inc. and may not be reproduced without prior written approval of NEC Unified Solutions, Inc.

  • Page 5: Table Of Contents

    PC Requirements ................. 2-1 Section 2 Features of SAT End-User Programming .......... 2-1 Section 3 Software Installation ................2-2 3.1 Installing Electra Elite IPK/Electra Elite System Administration Terminal (SAT) End-User Software ........... 2-2 Section 4 Using SAT .................... 2-3 Section 5 IP Connection (Configuration) ............

  • Page 6

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ THIS PAGE INTENTIONALLY LEFT BLANK ___________________________________________________________________________________ Table of Contents...

  • Page 7

    IP Address on Connect Screen ................2-10 Figure 2-12 Selecting Wizard for a Feature ................2-11 Figure 2-13 Sample Wizard ....................2-12 Figure 2-14 Electra Elite IPK/Electra Elite System Administration Terminal Software Screen Samples ....................2-14 Figure 2-15 File Menu ......................2-17 Figure 2-16 Edit Menu ......................2-19 Figure 2-17 Basic Menu ......................2-21...

  • Page 8

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ THIS PAGE INTENTIONALLY LEFT BLANK ___________________________________________________________________________________ List of Tables...

  • Page 9: General Information

    End-User program for the Electra Elite IPK/Electra Elite Key Telephone System. The SAT End-User is a user-friendly Windows application that allows the user to program and configure several features of the Electra Elite IPK/Electra Elite KTS from the PC environment.

  • Page 10

    Speed Dial Stored Characters Speed Dial System Voice Prompt Selection It is no longer necessary to call an authorized NEC technician to program these basic system features. Meeting the requirements of a company’s day-to-day communications needs just got easier! Electra Elite IPK/Electra Elite SAT software makes programming the system easy.

  • Page 11: Chapter 2 Sat End-user Programming

    SAT End-User Programming Chapter 2 ___________________________________________________________________________________ PC R ECTION EQUIREMENTS This manual provides detailed information for programming using the Electra Elite IPK/Electra Elite System Administration Terminal (SAT) End-User software. PC requirements: Pentium Processor Microsoft Windows 95, 98, ME, XP, 2000 or NT 4.0 (or higher) operating system At least 13 MB of free hard disk space Unused PC serial communication port MNP Class 4 or V.42 bis modem (if remote programming is required)

  • Page 12: Software Installation

    <=S7000: This is used when system software is S7000 or below. S8000: This is used when system software is S8000 only. IPK: This is used when the system is Electra Elite IPK R1000 or higher. • Enter the password. The default password is PASSWORD (in upper case letters).

  • Page 13: Using Sat

    Step 2, to COM1 on the KTS. For a modem connection, when the KTS is at a remote location, connect a modem to the SAT PC. See your authorized NEC Dealer for configuration of the KTS for modem connection.

  • Page 14: Ip Connection (configuration)

    SAT End-User program when IP connection is selected. Enter a password if the KTS requires one. See your authorized NEC Dealer for password information. Click the CONNECT or DIAL button, depending on the type of connection.

  • Page 15: Figure 2-2 Connection Type Screen

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Figure 2-2 Connection Type Screen Ensure that the IP Connection is selected. From the drop down list chose from the two available options: Direct Ethernet When the Direct Ethernet is selected, click the Setup button.

  • Page 16: Figure 2-4 Ip Connection Setup Screen

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ TCP Port Number: type in the assigned TCP port that has been assigned to the device. If the device has been contacted previously, the IP Address will be displayed in the drop down list under Hostname/IP Address and the TCP port number will be saved with the IP Address.

  • Page 17: Figure 2-5 Search For Device Screen

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Figure 2-5 Search for Device Screen Select the appropriate Subnet that the PC and the Elite LAN PC Programming Device is located in, and click Search. Once a device is found, the Device Search Results screen shows the available device(s) to be configured.

  • Page 18: Figure 2-7 Example Of Ip Connection Setup

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ The IP Connection Setup Screen will open with the current Device Settings. Figure 2-7 Example of IP Connection Setup Once the Elite LAN PC Programming Device is located configuration can be performed. Figure 2-8 IP Connection Setup...

  • Page 19: Figure 2-9 Successful Configuration Screen

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Once the appropriate selections have been made, click the Update button to update the Elite LAN PC Programming Device with the new settings. The Ping option can be used to verify that the device is able to be reached, the Factory Default button is used to restore the unit back to default settings.

  • Page 20: Wizard

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ In the drop down list, choose the site that was previously created and click the Connect button. The following information will be displayed to indicate the system’s IP address. Refer to Figure 2-11 IP Address on Connect Screen.

  • Page 21: Figure 2-12 Selecting Wizard For A Feature

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ When wizard is displayed, the user can select any feature from the list or can begin entering letters of the feature name. As the name is being entered, Quick Search finds the matching letters and highlights the match.

  • Page 22: Programming Screens

    When the SAT software program is launched, the first screen that is displayed is the Main Menu screen. This screen allows the user to access the options used to program the Electra Elite IPK/Electra Elite system. Figure 2-14 Electra Elite IPK/...

  • Page 23

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ additional selections are available. Refer to Figure 2-14 Electra Elite IPK/Electra Elite System Administration Terminal Software Screen Samples for an example of a Pulldown Menu. System Data Screen When an option is selected from a pulldown menu, a screen is displayed that allows the user to program data for the function selected.

  • Page 24: Figure 2-14 Electra Elite Ipk/electra Elite System Administration Terminal Software Screen Samples

    Information Bar item. The associated screen is by the darkened box surrounding option. indicates displayed. the tab name. Keyboard Shortcut. Figure 2-14 Electra Elite IPK/Electra Elite System Administration Terminal Software Screen Samples ___________________________________________________________________________________ 2 - 14 SAT End-User Programming...

  • Page 25: Toolbar

    When the icon appears shadowed, the tool is not available. When the icon is dark, the tool is available. Refer to Figure 2-14 Electra Elite IPK/Electra Elite System Administration Terminal Software Screen Samples for an example.

  • Page 26

    Advances to the next tab group. The F6 special function key provides a shortcut to this feature. Displays the help contents for the Electra Elite IPK SAT End-User software program. The F1 special function key provides a shortcut to this feature.

  • Page 27: Electra Elite Ipk/electra Elite Pulldown Menus

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ IPK/E ECTION LECTRA LITE LECTRA LITE ULLDOWN ENUS This section explains each of the pulldown menus that are available in SAT software. File The File pulldown menu provides options for basic file management.

  • Page 28

    Block. Designation Labels Electra Elite IPK SAT End-User version does not support exporting data to the DESI Label printing software. This menu item is disabled. However, if you chose to install DESI during SAT installation, you can still run DESI separately by clicking the...

  • Page 29: Figure 2-16 Edit Menu

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Edit The Edit pulldown menu allows files to be edited, swapped, defaulted, or copied. Figure 2-16 Edit Menu Undo Allows the user to undo current edits and return to the previous editing operation.

  • Page 30

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ Set Default All Allows the user to set all values to default on the open tab. Quick Search Allows the user to search the Memory Blocks by Memory Block Number, Memory Block Name, or Tab Name. After the search method is specified, a list is provided.

  • Page 31: Figure 2-17 Basic Menu

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Basic The Basic pulldown menu allows access to basic end-user programming items. Some menu items may be disabled if the appropriate hardware is not assigned, or a dependent data item is not set.

  • Page 32

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ CO/PBX Trunks This option allows user to program system data related to trunk assignments. One selection is available with the System-Wide option. Intercom This option allows the technician to program system data related to intercom assignments.

  • Page 33: Figure 2-18 User Menu

    Speed Dialing This option allows the user to program both System and Station Speed Dial memory locations. Each Multiline Terminal in the Electra Elite IPK/Electra Elite can be assigned individual speed dial numbers. Station Speed Dial can be denied in System Programming. If no Station Speed Dial memory locations are available, consult your authorized NEC Dealer.

  • Page 34: Figure 2-19 Communications Menu

    Electra Elite IPK/Electra Elite system. Figure 2-19 Communications Menu Connect This option allows the user to connect to the Electra Elite IPK/Electra Elite system. Disconnect This option allows the user to disconnect from the Electra Elite IPK/Electra Elite system.

  • Page 35

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Download This option allows the user to download the current Electra Elite IPK/Electra Elite configuration. Verify This option allows the user to compare the configuration programmed in the KTS with that of the PC.

  • Page 36: Figure 2-20 Help Menu

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ Help The Help pulldown menu allows access to online help. Figure 2-20 Help Menu Using Help This option provides access to the help topics window that describes how to use the help function.

  • Page 37

    Electra Elite IPK Document Revision 2a ___________________________________________________________________________________ Show MB Numbers When enabling this option, the memory block number is displayed above the cursor, when positioning the cursor over a data field. About This option provides information about the System Administration Terminal (SAT) End-User software.

  • Page 38

    Document Revision 2a Electra Elite IPK ___________________________________________________________________________________ THIS PAGE INTENTIONALLY LEFT BLANK ___________________________________________________________________________________ 2 - 28 SAT End-User Programming...

  • Page 40

    ( S A T ) Y S T E M D M I N I S T R A T I O N E R M I N A L S E R A N U A L N E C A m e r i c a , I n c . D o c u m e n t R e v i s i o n 2 a ( A p p l i e s t o R e l e a s e R 1 0 0 0 t h r o u g h R e l e a s e R 2 5 0 0...

This manual also for:

Electra elite

Comments to this Manuals

Symbols: 0
Latest comments: