Installing Base Cover Directly To The Wall - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
2. Attach the terminal to the Base Cover as shown in
Installing Terminal on Base
14.6.2

Installing Base Cover Directly to the Wall

1. Remove Base Cover and clip off the notches as shown on
Figure 8-58 Clipping Off
Cover.
Figure 8-57 Installing Terminal on Base Cover
Notches.
Figure 8-58 Clipping Off Notches
Document Revision 3
Figure 8-57
8 - 41