Dtp-1Hm-1/ Dtp-1Hm-2 Tel - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
3.4
___________________________________________________________________________________
12 - 10

DTP-1HM-1/ DTP-1HM-2 TEL

The Single Line Telephone is a fully modular terminal with a Flash key, Redial
key, 3-level receive volume control, 2-level ring volume control, data jack,
message waiting lamp, and eight programmable Feature Access/Speed Dial
keys.
Basic Port Package
A maximum of 56 DTP-1HM-1 or DTP-1HM-2 TELs can be installed. The total
number of all Multiline Terminals that can be installed is 56.
Expanded Port Package
A maximum of 184 DTP-1HM-1 or DTP-1HM-2 TELs can be installed. The
total number of all Multiline Terminals that can be installed is 200.
Each terminal requires an SLTII(1)-U10 ADP or SLI(4)/(8)-U( ) ETU.
Figure 12-9 DTP-1HM-1 TEL Single Line Telephone
The H switch setting for the receive volume control should only be used by
hearing impaired individuals, otherwise hearing damage may occur. This
telephone complies with HAC (Hearing Aid Compatible) volume control defined
by section 68.317 of the FCC Rules and Regulations, 1996 edition.
Electra Elite IPK II
Installing Single Line Telephones