NEC Electra Elite IPK II System Hardware Manual page 394

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
8 - 42
2. Connect the Base Cover to the wall as shown on
Using Screws to Attach Base Cover To
Figure 8-59 Using Screws to Attach Base Cover To Wall
3. Install the terminal on the Base Cover as shown on
Connecting Terminal to the Base
Terminal from the wall, press the knob used to unlatch the base
cover and push the terminal up until it disconnects.
Figure 8-60 Connecting Terminal to the Base Cover
Cover. To remove the
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II
Figure 8-59
Wall.
Figure 8-60