NEC Electra Elite IPK II System Hardware Manual page 495

Electra Elite IPK II
___________________________________________________________________________________
S 7 R
ECTION EMOVING
When the softkeys on the Multiline Terminal are not used, they can be removed using
the following procedure:
1.
S 8 A
ECTION DJUSTING
The base plate on the Electra Elite Multiline Terminal is hinged to allow adjustment to
raise or lower the terminal.
1.
___________________________________________________________________________________
System Hardware Manual
DTU/DTP S
OFTKEYS
Remove the softkeys by pulling the softkey plate upward as shown in
Figure 10-17 Removing DTU/DTP
Figure 10-17 Removing DTU/DTP Softkeys
DTU/DTP M
Turn the Multiline Terminal upside down and locate the tabs as shown in
10-18 Locating the Adjustment Tabs on the DTU/DTP Multiline
Figure 10-18 Locating the Adjustment Tabs on the DTU/DTP Multiline Terminal
Softkeys.
T
ULTILINE ERMINAL
Document Revision 3
H
EIGHT
Terminal.
Figure
10 - 15