Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 28
2.
Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked
C . Refer to
Terminal.
3.
Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
System on page
3.6.2
Installing the External Microphone
An external microphone can be installed on the HFU-U Unit. These
instructions apply to the external microphone obtained from NEC.
The microphone is equipped with a locking mute button and a red
LED indicator that is off when the microphone is in mute.
1.
Plug the microphone cord into the jack on the HF-R Unit.
The microphone should be one~three feet away from the
Multiline Terminal with the Mic grate facing the user.
Installing Electra Elite IPK II Optional Terminal Equipment
Figure 9-28 Attaching the HF-R Unit to the Multiline
Section 3 Connecting a Multiline Terminal to the
8-15.
Figure 9-29 Microphone with Mute
Electra Elite IPK II