NEC Electra Elite IPK II System Hardware Manual page 42

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Document Revision 3
___________________________________________________________________________________
Table 3-2 Maximum System Capacities for Station Interface ETUs (Continued)
Station Interface
Units
IVR Application
[VMP(4)/(8)-U( ) ETU
with IVR HDD Kit]
OPX(2)-U( ) ETU
SLI(4)-U( ) ETU
___________________________________________________________________________________
3 - 8
Description
This Interactive Voice Response ETU
has four ports to support IVR
applications. When the DSP-U( )
module is attached, eight ports are
available. It is installed in any
interface slot. This ETU shares the
number of station ports in the system.
This 2-Port Off-Premise Extension
Interface ETU provides termination
and operation of two off-premise
extensions. Each ETU has a built-in
ringer signal generator (RSG). Up to
1600 ohms of resistance (including
the Single Line instrument) is
acceptable between the OPX ETU
and the Single Line Telephone.
This ETU is installed in slots S1~S8
in any B64-U20 KSU and shares the
number of station ports in the system.
This 4-Port Single Line Interface ETU
supports four Single Line Telephones
and/or analog voice mail ports. Each
ETU provides a built-in ringer signal
generator (RSG) and Message
Waiting (MW) LED voltage to Single
Line Telephones.
This ETU is installed in slots S1~S8
in any B64-U20 KSU. The maximum
number depends on other station
ETUs installed. This ETU shares the
total number of station ports in the
system.
Maximum Capacities
Expanded
Basic Port
Port
Package
Package
1
1
6
22
12
22
System Specifications
Electra Elite IPK II
Notes
Notes 1, 3, 4, 6
Note 1, 2, 6
Notes 1, 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents